Starrett 13834 Band Saw Blade Coil 3/8 in 100 Ft 14 Tpi

Product Description

The STARRETT 13834 is a carbon steel band saw blade coil stock designed for continuous cutting applications in professional shop and trade environments. Supplied in a 100-foot coil, the blade measures 3/8 inch wide and 0.025 inches thick, with a constant-pitch 14-teeth-per-inch (TPI) configuration. The raker tooth set and straight tooth form deliver consistent chip clearance during contour and straight cuts. The flexible back construction allows the blade to be cut to any custom length and welded or brazed to fit a wide range of band saw frames. Fabricators, machinists, and maintenance technicians use coil stock when a single blade length does not cover multiple machines or job requirements.

This coil stock is suited for light metal, wood, and general-purpose cutting tasks on vertical or horizontal band saws in residential shop, commercial fabrication, and industrial maintenance settings. The 14 TPI constant pitch is well matched to cutting thin-to-medium section materials where a fine, controlled cut is needed. The raker set pattern alternates tooth offset for efficient swarf removal without aggressive blade deflection. Because the stock ships as a full 100-foot coil, it can be cut and joined on-site to produce multiple blades from a single purchase.

Key Features

• Carbon steel construction suitable for general-purpose band saw cutting applications
• 14 TPI constant pitch for consistent, controlled cuts in thin-to-medium section materials
• Raker tooth set with straight tooth form for balanced chip clearance and blade stability
• Flexible back design allows coil to be cut and welded to custom blade lengths
• 3/8 inch blade width supports contour cutting on compatible band saw guides
• 100-foot coil length provides enough stock to produce multiple blades from a single unit

Compatibility

Designed as a universal coil stock replacement for band saws that accept 3/8 inch wide blades with a 0.025 inch blade thickness. Verify blade width, thickness, and TPI requirements against your machine specifications before cutting and joining.

Installation Notes

Installation of band saw blade coil stock should be performed by qualified personnel familiar with blade welding or brazing equipment. Disconnect and lock out power to the band saw before removing the old blade or mounting a new one. Measure the required blade length carefully using the band saw wheel circumference and frame geometry before cutting the coil. Follow the band saw manufacturer guidelines and applicable ANSI safety standards for blade tensioning and blade-guide adjustment after installation.