Starrett 13829 Band Saw Blade Coil 1/4 in 100 Ft 10 Tpi

Product Description

The STARRETT 13829 is a band saw blade coil stock designed for continuous cutting operations where custom blade lengths are required. The coil provides 100 feet of 1/4-inch-wide carbon steel blade at 0.025 inches thick, allowing technicians and shop professionals to cut blades to exact length for their specific saw equipment. At 10 teeth per inch with a constant pitch and raker tooth set, this blade delivers controlled, consistent cuts through a range of materials. The flexible back construction reduces stress during contour cutting and tight-radius work, extending blade service life in high-cycle applications.

This coil stock is suited for maintenance shops, fabrication facilities, and trade professionals who run multiple band saws or require non-standard blade lengths not available in welded loop form. The 1/4-inch width and 10 TPI configuration handles contour cutting and general-purpose straight cutting on metal, wood, and plastic stock. Shops that weld their own blades on-site will find this coil a practical stocking solution for high-volume blade replacement programs.

Key Features

• 100-foot coil yields multiple blades per roll, reducing per-blade cost for high-volume shops
• 1/4-inch blade width with 0.025-inch thickness supports contour and radius cutting applications
• 10 TPI constant pitch delivers smooth, consistent chip load across the cut
• Raker tooth set provides efficient chip clearance for general-purpose cutting
• Flexible back construction reduces fatigue cracking during tight-radius and contour work
• Carbon steel construction suitable for cutting wood, plastic, and softer non-ferrous materials

Compatibility

Designed as coil stock for band saws accepting 1/4-inch-wide blades; compatible with any saw that uses field-welded or field-cut blade stock of this width and thickness.

Installation Notes

Blade cutting and welding from coil stock should be performed by qualified shop personnel using a blade welder and appropriate cutting tools. Power down and lock out the band saw before installing any blade. Ensure blade tension and tracking are set according to the saw manufacturer specifications before resuming cuts. Wear cut-resistant gloves when handling uncoiled blade stock, as edges are sharp along the full coil length.