Starrett 13090 Band Saw Blade Coil Stock 3/4in 150ft Bi-metal

Product Description

The STARRETT 13090 is a bi-metal band saw blade coil stock designed for continuous cutting operations in metal fabrication and industrial sawing environments. The coil format provides 150 feet of blade material, allowing shops and service operations to cut blades to custom lengths as needed. Constructed with a high speed steel toothed edge bonded to an alloy steel back, the blade delivers durability under demanding cutting cycles. The variable pitch tooth pattern, running 6 to 10 teeth per inch, reduces vibration and harmonic resonance during cuts, making it well suited for a range of material thicknesses and profiles.

This coil stock is intended for use with band saw machines that accept 3/4 inch wide blades. The 0.035 inch blade thickness is standard for industrial-grade horizontal and vertical band saws used in metal cutting applications. The raker tooth set pattern distributes cutting load evenly, which extends blade life when cutting solid bar stock, structural shapes, tubing, and similar metal workpieces. This product is appropriate for machine shops, fabrication facilities, and maintenance operations that require on-site blade fabrication capability.

Key Features

• Bi-metal construction: high speed steel teeth bonded to alloy steel back for extended cutting life
• Variable pitch 6-10 TPI reduces vibration and suits a range of material thicknesses
• Raker tooth set distributes cutting load for consistent performance on solid and structural stock
• 150-foot coil allows custom blade lengths to be cut on-site as needed
• Straight tooth rake and straight tooth form for consistent chip clearance
• Contour cutting capable for non-linear and curved cut paths

Compatibility

Designed for use with band saw machines that accept 3/4 inch wide, 0.035 inch thick blade stock. Coil stock format is compatible with band saw blade welding equipment used to fabricate finished loop blades to length.

Installation Notes

Blade fabrication from coil stock should be performed by qualified personnel using appropriate blade welding or brazing equipment. Ensure the band saw is fully powered down and de-energized before installing any blade. Follow the saw manufacturer's tension and guide specifications when mounting finished blades. Handle coil stock with cut-resistant gloves, as blade edges are sharp throughout the full coil length.