Starrett 12665 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The STARRETT 12665 is a welded bandsaw blade from the Duratec SFB series, designed for continuous cutting operations on stationary band saw equipment. It measures 14 feet 6 inches in length, 1 inch in width, and 0.035 inches in thickness, with a constant 10 teeth-per-inch pitch. The blade is constructed from carbon steel on both the body and tooth, with a raker tooth set and straight tooth form. A flexible back type reduces fatigue stress during extended use. This blade is installed by machinists, fabricators, and trade technicians working with ferrous metal, non-ferrous metal, plastic, and plywood stock.

The STARRETT 12665 suits production and job-shop environments where a general-purpose welded blade is required for contour cutting applications. The constant 10 TPI pitch delivers consistent chip load across varied cross-sections, making it practical for both straight and contour cuts on mid-range material thicknesses. The raker set pattern distributes cutting forces evenly, which helps maintain blade tracking on most standard band saw machines. It ships as a single blade ready to mount without additional prep.

Key Features

• Duratec SFB series carbon steel construction for body and tooth
• Constant 10 TPI pitch for consistent chip load and smooth cut finish
• Raker tooth set distributes cutting forces and reduces blade drift
• Flexible back type resists fatigue cracking during continuous operation
• Contour cutting capable for curved and irregular workpiece profiles
• Compatible material applications include ferrous metal, non-ferrous metal, plastic, and plywood

Compatibility

Designed as a welded replacement bandsaw blade for stationary band saw machines accepting a 14-foot 6-inch blade loop, 1 inch wide, 0.035 inches thick, with a 10 TPI constant pitch configuration. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.

Installation Notes

Installation should be performed by a qualified technician with the band saw fully de-energized and the power source locked out before blade removal or installation. Verify wheel guides, blade guards, and blade tension are set according to the machine manufacturer specifications before resuming operation. Blade tracking and tension should be confirmed at low speed before full-load cutting commences. Wear appropriate PPE including cut-resistant gloves when handling the blade loop.