Starrett 12375 Welded Bandsaw Blade 11 Ft 3/4 in 10 Tpi

Product Description

The STARRETT 12375 is a welded bandsaw blade engineered for continuous cutting in metal fabrication and general shop environments. Part of the Duratec SFB series, this blade measures 11 feet in length and 3/4 inch in width with a blade thickness of 0.032 inches. It runs a constant-pitch, 10 TPI raker tooth pattern with a straight tooth form and flexible back construction. The blade is manufactured from carbon steel on both the blade body and tooth material, making it a dependable workhorse for repetitive straight and contour cuts. Installation is performed by licensed machinists or skilled trade technicians familiar with bandsaw setup and blade tensioning.

This blade is suited for contour and straight cutting applications across a range of materials including ferrous metal, non-ferrous metal, plastic, and plywood. The constant 10 TPI pitch delivers consistent chip load across material transitions, and the raker tooth set helps clear chips efficiently during cuts. It fits bandsaws designed to accept an 11-foot blade with 3/4-inch width and is appropriate for both light industrial and heavy shop use where a carbon steel blade meets the material hardness requirements.

Key Features

• Duratec SFB series carbon steel blade body and tooth construction
• Constant 10 TPI pitch with raker tooth set for consistent chip clearance
• Straight tooth form with flexible back for contour cutting capability
• 0.032-inch blade thickness for reduced kerf and material waste
• Compatible with ferrous metal, non-ferrous metal, plastic, and plywood
• Welded construction for continuous, reliable blade loop integrity

Compatibility

Designed as a replacement or consumable bandsaw blade for machines accepting an 11-foot blade loop at 3/4-inch width. Suitable for ferrous metal, non-ferrous metal, plastic, and plywood cutting applications.

Installation Notes

Installation should be performed by a qualified machinist or experienced shop technician. Power down and lockout the bandsaw completely before removing the old blade or installing a new one. Follow the bandsaw manufacturer guidelines for blade tension, guide adjustment, and wheel tracking before resuming operation. Wear cut-resistant gloves when handling the coiled blade during installation.