Starrett 10905 Welded Bandsaw Blade 3 Tpi Carbon Steel

Product Description

The STARRETT 10905 is a welded bandsaw blade from the Duratec SFB series, designed for continuous loop installation on bandsaw machines used in metal fabrication, woodworking, and plastics cutting. The blade measures 19 feet 6 inches in length and 3/4 inch in width, with a thickness of 0.032 inches. It runs a constant-pitch skip tooth pattern at 3 teeth per inch (TPI) with a straight rake angle and raker tooth set — a configuration that clears chips efficiently on non-ferrous and soft ferrous cuts. Both the blade body and teeth are carbon steel construction with a flexible back type, suited for general-purpose contour cutting in production and maintenance shops.

This blade is intended for contour and resawing applications on stationary bandsaws in industrial, fabrication, and maintenance environments. The 3 TPI constant pitch and skip tooth form make it effective on ferrous metal, non-ferrous metal, plastic, and plywood. The 19 foot 6 inch loop length fits mid-size floor-standing bandsaw frames common in metal shops and trade workrooms. Licensed machinists, fabricators, and maintenance technicians are the primary installers and users of this blade type.

Key Features

• 19 feet 6 inches welded loop length — ready to install, no field brazing required
• 3 TPI constant pitch with skip tooth form for efficient chip clearance
• Raker tooth set for balanced cutting on ferrous and non-ferrous materials
• Carbon steel blade body and teeth — Duratec SFB series construction
• Flexible back type supports contour cutting and tight-radius work
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood applications

Compatibility

Designed as a general-purpose welded replacement bandsaw blade for mid-size stationary bandsaws accepting a 19 foot 6 inch loop with a 3/4 inch blade width. Verify wheel diameter, blade guide clearance, and tension specifications on the host machine before installation.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician familiar with the host machine. Disconnect and lock out power to the bandsaw before removing the old blade or threading the new one. Wear cut-resistant gloves when handling the coiled blade — carbon steel edges are sharp before and after use. Set blade tension and tracking per the bandsaw manufacturer specifications before running the machine under load.