Starrett 10815 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The STARRETT 10815 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous-loop cutting on stationary bandsaws. At 13 feet 11 inches long and 1 inch wide, with a 0.035-inch blade thickness, this blade fits mid-size to large floor-standing bandsaw units. The 10 TPI constant-pitch tooth configuration delivers consistent chip load across the cut, making it a reliable choice for production or maintenance shop use. Raker tooth set and straight tooth form reduce blade deflection during contour cuts. Licensed HVAC, plumbing, and mechanical contractors working in fabrication or service environments will find this blade suited to a wide range of shop tasks.

The 10815 is built for contour cutting across multiple material types, including ferrous metal, non-ferrous metal, plastic, and plywood. The flexible back construction allows the blade to track smoothly on bandsaw wheels without developing stress cracks under normal operating cycles. The constant 10 TPI pitch suits materials of moderate thickness where a uniform chip load is preferred over a variable-pitch pattern. This blade is packaged and sold as a single unit.

Key Features

• Duratec SFB series carbon steel construction for blade body and teeth
• 10 TPI constant-pitch layout for consistent cut finish on moderate-thickness stock
• Raker tooth set reduces lateral blade drift during contour and straight cuts
• Flexible back type resists fatigue cracking through continuous bandsaw wheel flex
• Rated for contour cutting in ferrous metal, non-ferrous metal, plastic, and plywood
• Welded loop construction — ready to install without field joining

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for stationary bandsaw machines accepting a 13-foot 11-inch loop, 1-inch wide, 0.035-inch thick blade.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician following the machine manufacturer's blade-change procedure. Disconnect and lock out power to the bandsaw before removing the blade guard or opening wheel covers. Verify wheel diameter and blade guide spacing match the blade width and thickness before tensioning. Do not exceed the blade tension specification listed on the machine nameplate.