Starrett 10750 Welded Bandsaw Blade 4 Tpi Carbon Steel

Product Description

The STARRETT 10750 is a welded carbon steel bandsaw blade designed for contour cutting in metal fabrication, woodworking, and plastics applications. Part of the Duratec SFB series, it measures 11 feet 9 inches long and 3/8 inch wide with a blade thickness of 0.025 inches. The 4 TPI constant-pitch skip tooth configuration with raker set and straight rake angle delivers efficient chip clearance and consistent cuts through a range of materials. This blade is installed by machinists, fabricators, and trade professionals operating vertical or horizontal bandsaws requiring this loop length.

The 10750 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The flexible back construction allows the blade to run continuously on bandsaw wheels without fatigue cracking under normal operating conditions. The skip tooth form reduces heat buildup and loading when cutting softer or non-metallic materials, making it a practical choice for shops that work across multiple material types. The constant pitch pattern provides predictable feed rates and finish quality on straightforward contour cuts.

Key Features

• Duratec SFB series carbon steel construction for both blade body and tooth material
• 4 TPI constant pitch for consistent chip clearance across supported materials
• Skip tooth form reduces heat and material loading on non-ferrous and plastic cuts
• Raker tooth set provides balanced cutting action and extended blade life
• Flexible back type allows continuous operation without premature fatigue
• Welded loop construction ready to install without additional cutting or joining

Compatibility

Designed as a welded replacement bandsaw blade for vertical or horizontal bandsaws that accept an 11 foot 9 inch blade loop with a 3/8 inch blade width. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Confirm wheel diameter, blade guides, and tensioning system on the host machine are compatible with 3/8 inch wide blades before installation. Inspect blade guides and thrust bearings for wear before tensioning the new blade. Always wear cut-resistant gloves when handling uncoiled or unpackaged bandsaw blades.