Starrett 10676 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The STARRETT 10676 is a welded bandsaw blade from the Duratec SFB series, designed for continuous loop installation on stationary band saws used in metal fabrication, woodworking, and light industrial cutting applications. The blade measures 10 feet 10.5 inches in length and 0.75 inches in width, with a blade thickness of 0.032 inches. The 10 teeth-per-inch constant pitch configuration delivers consistent chip load and smooth cut finish across a range of materials. Carbon steel construction is used for both the blade body and tooth, providing reliable performance in general-purpose cutting tasks. Licensed trades and shop technicians typically install this blade on horizontal or vertical band saws during routine blade replacement.

The STARRETT 10676 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The raker tooth set and straight tooth form make it appropriate for contour cutting operations where consistent tooth engagement is required. The flexible back type allows the blade to track smoothly on standard band saw wheel configurations without excessive fatigue. This blade is commonly used in plumbing, HVAC fabrication shops, and general metalworking environments where a reliable general-purpose band saw blade is needed for mixed-material cutting.

Key Features

• 10 TPI constant pitch for consistent chip load across ferrous and non-ferrous metals, plastic, and plywood
• Raker tooth set with straight tooth form for controlled contour cutting
• Carbon steel blade body and tooth material for general-purpose durability
• Flexible back type reduces fatigue during continuous band saw operation
• Duratec SFB series construction for extended service life in production cutting
• Welded loop ready for direct installation on compatible band saw machines

Compatibility

Designed as a welded loop replacement bandsaw blade for stationary band saws accepting a 0.75 inch wide blade with a 10 feet 10.5 inch loop length. Confirm wheel spacing and blade guide clearance on the target machine before installation.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician familiar with the specific machine being serviced. Power down and lockout the band saw before removing the old blade or installing the new one. Blade tension and tracking must be set according to the machine manufacturer's specifications after installation. Always wear cut-resistant gloves when handling bandsaw blades, as the toothed edge presents a laceration hazard during coiling, transport, and installation.