Starrett 10660 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The STARRETT 10660 is a welded bandsaw blade from the Duratec SFB series, designed for continuous loop operation on stationary band saws used in metalworking and fabrication shops. The blade measures 10 feet 5 inches in length and 3/4 inch in width, with a thickness of 0.032 inches. It runs a constant 10 teeth per inch (TPI) pitch with a raker tooth set and straight tooth form on a flexible carbon steel back. Both the blade body and tooth material are carbon steel. Licensed HVAC, plumbing, and mechanical contractors frequently use band saws like this for cutting pipe, conduit, and structural stock, making this blade a common shop consumable.

The STARRETT 10660 is suited for contour cutting applications in light industrial, commercial, and shop environments. Its material application range includes ferrous metal, non-ferrous metal, plastic, and plywood, covering the variety of stock materials encountered in mechanical trades work. The constant pitch and raker set deliver consistent chip clearance and a predictable cut finish across these materials. It is sold as a single welded blade ready to mount.

Key Features

• 10 feet 5 inch blade length — welded loop, ready to install
• 3/4 inch blade width with 0.032 inch thickness for stable tracking
• 10 TPI constant pitch for consistent cutting across varied stock
• Raker tooth set with straight tooth form for efficient chip clearance
• Carbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood
• Flexible back construction from the Duratec SFB series for contour cutting capability

Compatibility

Designed for stationary band saws accepting a 10 feet 5 inch welded loop blade with a 3/4 inch width. Verify wheel diameter, blade guide clearance, and tension capacity on the specific saw before installation.

Installation Notes

Band saw blade replacement should be performed by a qualified technician following the saw manufacturer's service procedure. Disconnect and lock out power to the saw before opening the blade guards or removing the existing blade. Wear cut-resistant gloves when handling coiled or looped blades. Confirm proper blade tension and tracking adjustment before resuming operation.