Starrett 10464 Welded Bandsaw Blade 24 Tpi Carbon Steel

Product Description

The STARRETT 10464 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting across a broad range of materials. The blade measures 93 inches in overall length and 0.5 inches wide, with a thickness of 0.025 inches and a constant-pitch tooth pattern at 24 teeth per inch. The wavy tooth set and straight tooth form make this blade suited for fine, consistent cuts in production and job-site applications. It is installed by machinists, fabricators, and trade professionals who run horizontal or vertical bandsaw equipment on a regular basis.

This blade is rated for cutting ferrous metal, non-ferrous metal, plastic, and plywood, making it a versatile option for shops handling mixed-material work. The flexible back type allows the blade to track smoothly on bandsaw wheels without excessive fatigue at the weld joint. At 24 TPI and constant pitch, it is best suited for thin-wall stock and fine-finish cuts where tooth loading must remain controlled throughout the cut. The Duratec SFB series is built to handle repeated use in light-to-medium duty cutting cycles.

Key Features

• 93-inch welded blade length fits common benchtop and floor-standing bandsaw models
• 24 TPI constant pitch for fine, controlled cuts with minimal burr
• Wavy tooth set reduces tooth loading and extends blade life on thin stock
• Carbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood
• Flexible back type supports smooth tracking and resists fatigue cracking at the weld
• Contour cutting capable for curved and irregular cut profiles

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for bandsaws accepting a 93-inch blade length with a 0.5-inch blade width.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician with the saw fully powered down and unplugged before service. Verify wheel diameter, blade guide spacing, and tension specifications on the saw match the blade width and thickness before mounting. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades. Follow the saw manufacturer's tensioning procedure to avoid over-stressing the weld joint.