Starrett 10377 Welded Bandsaw Blade 4 Tpi Carbon Steel

Product Description

The STARRETT 10377 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary bandsaws in professional shop environments. The blade measures 80 inches in length and 0.25 inches in width, with a 0.025-inch thickness and a constant-pitch 4 TPI skip-tooth configuration. The raker tooth set and straight rake angle work together to clear chips efficiently during cuts through a range of materials. Installation is performed by licensed or experienced shop technicians as part of routine blade replacement on horizontal or vertical bandsaw equipment.

This blade is suited for cutting ferrous metals, non-ferrous metals, plastics, and plywood, making it a versatile choice for fabrication shops, HVAC contractors cutting sheet metal, and general-purpose machining environments. The skip-tooth form reduces heat buildup and material drag in softer materials, while the flexible back type allows the blade to track properly through tight contour cuts. The constant pitch delivers a consistent cut finish across the full range of listed material applications.

Key Features

• 80-inch welded loop length fits standard bandsaw machines requiring a 6-foot 8-inch blade
• 4 TPI constant-pitch skip-tooth configuration for efficient chip evacuation
• Raker tooth set with straight rake angle for balanced cutting action
• Carbon steel blade and tooth material for cost-effective general-purpose cutting
• Flexible back type supports contour and curved cutting paths
• Compatible with ferrous metal, non-ferrous metal, plastic, and plywood applications

Compatibility

Designed as a direct-fit welded replacement blade for bandsaw machines requiring an 80-inch loop with a 0.25-inch blade width. The Duratec SFB series targets general-purpose contour cutting applications across ferrous metal, non-ferrous metal, plastic, and plywood materials.

Installation Notes

Blade replacement on a bandsaw should be performed by a qualified technician with the machine fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Verify wheel diameter and throat capacity on the host machine before installing to confirm the 80-inch loop length and 0.25-inch width are within spec. Blade tension and tracking should be adjusted according to the bandsaw manufacturer guidelines after installation. Do not operate the blade above the material application ratings listed for this product.