Starrett 10359 Welded Bandsaw Blade 24 Tpi Carbon Steel

Product Description

The STARRETT 10359 is a welded bandsaw blade engineered for consistent, reliable performance in metal and non-metal cutting applications. Part of the Duratec SFB series, this blade measures 5 feet in length and 1/2 inch wide, with a 0.025-inch thickness and a constant-pitch, 24 teeth-per-inch configuration. The carbon steel construction on both the blade body and tooth material makes it well-suited for repeated use across ferrous metals, non-ferrous metals, plastics, and plywood. The raker tooth set and straight tooth form work together to deliver controlled chip clearance and clean cuts. Licensed HVAC techs, plumbers, metalworkers, and general tradespeople install this blade on standard bandsaw equipment where a welded, continuous-loop blade is required.

This blade is designed for contour cutting tasks in both shop and field environments. Its flexible back type allows it to navigate curved cuts without excessive blade stress. The straight rake angle and constant pitch pattern make it a dependable choice for cutting ferrous and non-ferrous metals, plastic stock, and plywood. Typical installations include light fabrication shops, mechanical contractors cutting pipe or strut, and maintenance technicians needing a reliable replacement blade for stationary or portable bandsaw units.

Key Features

• Duratec SFB series construction with carbon steel blade body and tooth material
• 24 TPI constant pitch for smooth, consistent cuts in thin materials
• Raker tooth set with straight tooth form for effective chip clearance
• Flexible back type supports contour cutting without premature fatigue
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood applications
• Welded continuous-loop design — no blade joining required at installation

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for standard bandsaws accepting a 5-foot, 1/2-inch-wide continuous-loop blade.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Verify wheel diameter and blade guide spacing on the host bandsaw before installing to confirm proper blade tension and tracking. Wear cut-resistant gloves when handling the blade during installation. Do not operate the saw without all blade guards and guides properly reinstalled and adjusted.