Starrett 10037 Band Saw Blade Coil 3/4in 100ft 8 Tpi Carbon Steel

Product Description

The STARRETT 10037 is a carbon steel band saw blade coil stock designed for continuous cutting applications in metal fabrication, woodworking, and general shop use. The coil measures 100 feet in length and 3/4 inch in width, with a blade thickness of 0.032 inches. At 8 teeth per inch with a constant pitch and raker tooth set, the blade delivers consistent chip clearance and smooth, controlled cuts in a range of materials. The flexible back construction allows the blade to withstand the repeated flexing of band saw operation without premature fatigue cracking. Machinists and shop technicians cut this coil to length and weld it to fit specific band saw wheel diameters on site.

This coil stock is suited for production environments and job shops where multiple band saw blades need to be fabricated to different lengths from a single inventory source. The 3/4 inch width is a common dimension for vertical and horizontal band saws used in metal cutting and contour cutting applications. The straight tooth rake angle and straight tooth form make this blade appropriate for general-purpose cutting tasks. The 100-foot coil provides enough material to produce several finished blades depending on the wheel circumference of the target saw.

Key Features

• Carbon steel blade material for general-purpose cutting durability
• 8 teeth per inch constant pitch for consistent chip load and feed rate
• Raker tooth set for efficient chip evacuation on straight and contour cuts
• Flexible back construction resists fatigue from continuous band saw flexing
• 3/4 inch blade width supports contour cutting capability
• 100-foot coil allows on-site blade fabrication to custom lengths

Compatibility

Designed as coil stock for fabrication into finished band saw blades on vertical or horizontal band saws that accept 3/4 inch wide blades. Specific machine compatibility depends on wheel diameter, blade guide clearance, and welder capability at the point of fabrication.

Installation Notes

Blade fabrication from coil stock requires a band saw blade welder and grinder to cut, butt-weld, and finish the blade to the required loop length. Always wear cut-resistant gloves and eye protection when handling and coiling band saw blade stock. Power down the band saw and release blade tension before removing an existing blade or installing a new one. Follow the saw manufacturer guidelines for blade tracking and tension after installation.