Starrett 10033 Band Saw Blade Coil 5/8 in 100 Ft 10 Tpi

Product Description

The STARRETT 10033 is a carbon steel band saw blade coil stock designed for continuous-length cutting applications in metal fabrication, woodworking, and general trade shop use. The coil measures 100 feet in length with a 5/8-inch blade width and 0.032-inch thickness, giving technicians and shop pros the flexibility to cut custom blade lengths to fit multiple saw models from a single coil. The blade runs a constant pitch of 10 teeth per inch (TPI) with a raker tooth set and straight tooth form, making it well-suited for general-purpose contour and straight cutting tasks. A flexible back construction helps the blade handle curved cuts and reduces fatigue cracking during operation.

This coil stock is intended for use in horizontal and vertical band saws in production shops, maintenance facilities, and trade environments where custom blade lengths are regularly needed. The 10 TPI constant pitch is effective on a wide range of materials including mild steel, aluminum, and non-ferrous stock of moderate cross-section. Contour cutting is supported by the blade geometry. Licensed machinists, fabricators, and maintenance technicians are the primary installers. The 100-foot coil reduces the frequency of reordering compared to pre-cut blades, making it practical for high-volume shop environments.

Key Features

• Carbon steel construction provides reliable cutting performance on ferrous and non-ferrous materials
• 10 TPI constant pitch delivers consistent chip load across the full cut
• Raker tooth set clears chips efficiently during straight and contour cuts
• Flexible back reduces the risk of cracking during tight-radius contour cutting
• 100-foot coil length allows custom blade sizing for multiple saw configurations
• Straight tooth rake angle and form maintain predictable, controlled cutting action

Compatibility

Designed as a general-purpose coil stock replacement blade for band saws that accept 5/8-inch wide blades with 0.032-inch thickness. Cut to length on-site to fit compatible saw configurations.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician familiar with band saw blade handling and tensioning procedures. Disconnect and lock out power to the saw before removing the old blade or installing a new one. Use appropriate blade-cutting and joining equipment when sizing the coil stock to length, and follow the saw manufacturer guidelines for blade tension and tracking adjustment. Handle coiled blade stock with cut-resistant gloves, as uncoiling can result in rapid spring-back.