Starrett 00067 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The STARRETT 00067 is a welded bandsaw blade from the Duratec SFB series, designed for continuous contour cutting on stationary band saw machines. The blade measures 14 feet 6 inches in length, 1 inch in width, and 0.035 inches in thickness. It runs a constant-pitch, 6 teeth per inch (TPI) configuration with a raker tooth set and straight tooth form. Constructed from carbon steel throughout — both the blade back and tooth material — it delivers consistent performance across a range of material types. The flexible back type reduces blade fatigue during curved cuts. This blade is a stock replacement or shop-supply item typically sourced by millwrights, maintenance technicians, and fabrication shops.

The STARRETT 00067 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood on band saw equipment. The 6 TPI constant-pitch geometry makes it a general-purpose choice for moderate material thicknesses where a balance of cut speed and surface finish is required. The raker tooth set clears chips efficiently, reducing heat buildup during extended cuts. It is well-matched to production and job-shop environments where a durable, re-orderable blade is needed for varied workpiece materials.

Key Features

• Blade length: 14 feet 6 inches — fits common mid-size stationary band saws
• 6 TPI constant pitch — balanced cut speed and finish across multiple material types
• Raker tooth set with straight tooth form for efficient chip clearance
• Full carbon steel construction — blade back and tooth material
• Flexible back type reduces fatigue and stress cracking during contour cuts
• Contour cutting capable — suitable for curved and straight cuts
• Duratec SFB series — designed for multi-material shop applications

Compatibility

Designed as a welded replacement bandsaw blade for stationary band saw machines accepting a 14-foot 6-inch blade loop, 1 inch wide, 0.035 inches thick, with a 6 TPI constant-pitch configuration.

Installation Notes

Band saw blade installation should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Verify blade tension and tracking according to the band saw manufacturer's specifications before resuming operation. Wear cut-resistant gloves when handling the coiled or uncoiled blade. Inspect blade guides and thrust bearings for wear before mounting a new blade.