Starrett 00066 Welded Bandsaw Blade 10 Ft 3/8 in 10 Tpi

Product Description

The STARRETT 00066 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous contour cutting in shop and industrial environments. The blade measures 10 feet in length and 3/8 inch in width with a 0.025-inch thickness. It runs at 10 teeth per inch (TPI) in a constant-pitch configuration with a raker tooth set and straight tooth form. The flexible back type reduces stress during curved cuts. Metalworking professionals, fabricators, and machinists install this blade on standard horizontal and vertical band saws for precision cutting of ferrous and non-ferrous materials.

This blade is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The constant 10 TPI pitch makes it a reliable choice for general-purpose shop work where consistent chip load and finish quality matter across varying material thicknesses. The raker set pattern balances cutting speed with kerf control. It is appropriate for residential shop use and light commercial fabrication environments where a durable, pre-welded blade saves setup time compared to bulk blade stock.

Key Features

• 10-foot welded blade length — ready to install, no field welding required
• 3/8-inch width with 0.025-inch thickness for flexible back contour cutting
• 10 TPI constant pitch for consistent chip load across ferrous and non-ferrous stock
• Raker tooth set with straight tooth form balances cut speed and surface finish
• Carbon steel blade and tooth material — Duratec SFB series construction
• Compatible material applications: ferrous metal, non-ferrous metal, plastic, and plywood

Compatibility

Designed as an OEM-style replacement or service blade for standard band saws accepting a 10-foot, 3/8-inch wide welded bandsaw blade.

Installation Notes

Bandsaw blade replacement is typically performed by a qualified shop technician or machinist. Disconnect and lock out power to the saw before removing the old blade or installing a new one. Verify that the blade guides, blade tension setting, and wheel tracking are properly adjusted after installation per the saw manufacturer's service documentation. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades.