Starrett 00058 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 00058 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on metal-cutting and general-purpose band saws. It measures 150 inches in length and 3/4 inch in width, with a blade thickness of 0.032 inches. The 14 TPI constant-pitch tooth pattern delivers consistent chip load across the cut. The raker tooth set and straight tooth form are well suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. Licensed HVAC technicians, plumbers, electricians, and general tradespeople rely on blades like this for precision cuts during rough-in and fabrication work.

This blade is intended for use on band saws that accept a 150-inch blade with 3/4-inch width. The flexible back type allows the blade to track smoothly on the saw wheels without fatigue cracking under normal service loads. The constant pitch of 14 TPI makes it a practical choice for light to medium stock in a shop or field environment. The Duratec SFB series positions this blade as a general-trade replacement suitable for cutting a wide range of materials encountered on the job site.

Key Features

• 150-inch welded blade length fits standard band saws requiring that loop size
• 14 TPI constant pitch for consistent, smooth cutting action
• Raker tooth set with straight tooth form optimized for chip clearance
• Carbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood
• Flexible back type resists fatigue and supports extended blade life
• Contour cutting capability for curved and irregular workpiece profiles

Compatibility

Designed to fit band saws that accept a 150-inch loop blade with 3/4-inch blade width. Verify your saw's blade length and width specifications before installation. No specific model compatibility data was provided by the manufacturer for this listing.

Installation Notes

Blade installation and tensioning should be performed by a qualified operator following the band saw manufacturer's guidelines. Power down and lockout the saw before removing the old blade or installing a new one. Use appropriate cut-resistant gloves when handling the blade. Do not exceed the blade speed rating of the saw or use this blade on materials outside its stated application range.