Standard Abrasives 7100114441 Deburring Wheel 6 in Silicon Carbide

Product Description

The STANDARD ABRASIVES 7100114441 is a convolute deburring wheel designed for edge blending, deburring, and surface conditioning on metal workpieces. Built with silicon carbide abrasive in a hard, fine-grade, density-9 construction, this wheel delivers consistent cut and controlled material removal across automated and manual applications. At 6 inches in diameter with a 1-inch center hole and a 0.5-inch face width, it fits a range of spindle tooling configurations. The 6,000 RPM maximum speed rating makes it suitable for both high-cycle production runs and bench-mounted finishing work. Metalworking shops and fabrication facilities will find this wheel appropriate for final deburring passes on ferrous and non-ferrous parts.

This convolute wheel is used in light to medium deburring and edge-finishing operations on machined, stamped, or cast metal components. The silicon carbide abrasive grain is well suited for harder metals and non-ferrous materials where consistent surface finish is required. Compatible tooling includes automated equipment, feed-through machines, and straight shaft stationary and portable tools, making it versatile across production line and standalone finishing setups.

Key Features

• Silicon carbide abrasive grain for consistent cut on ferrous and non-ferrous metals
• Density 9 hard-grade convolute construction for controlled, repeatable material removal
• 6,000 RPM maximum speed rating supports high-cycle automated and manual use
• 1-inch center hole fits standard spindle arbors used across common finishing equipment
• 0.5-inch face width provides focused edge contact for precise deburring passes
• Compatible with automated equipment, feed-through machines, and straight shaft portable tools

Compatibility

Designed for use with automated equipment, feed-through machines, and straight shaft stationary and portable tools as stated by the manufacturer.

Installation Notes

Installation is typically performed by a machinist or tool-and-die technician in a metalworking or fabrication environment. Always power down and de-energize the spindle or finishing machine before mounting or removing the wheel. Verify the machine spindle speed does not exceed the 6,000 RPM maximum rating before operation. Inspect the wheel for damage before each use and ensure the arbor and flanges are clean and properly seated.