Standard Abrasives 7010330149 Deburring Disc 2in Fine

Product Description

The STANDARD ABRASIVES 7010330149 is a 2-inch diameter deburring disc designed for light material removal, edge deburring, and surface blending on metal workpieces. Built with a silicon carbide abrasive in a fine grade, it delivers consistent cut rate on non-ferrous metals, cast iron, and hardened surfaces where aluminum oxide would wear prematurely. The quick-change connector mounts directly to compatible quick-change mandrels, cutting setup time between disc changes. At 0.25 inches thick, the disc maintains geometry under moderate lateral pressure. Machinists, fabricators, and maintenance technicians use this disc for finishing operations where burr removal and surface prep are the primary objectives.

This disc is suited for bench-mount or handheld rotary tool applications in metal fabrication shops, maintenance and repair environments, and light industrial settings. The fine grade and silicon carbide construction make it a practical choice for deburring drilled holes, port edges, and machined contours on aluminum, brass, stainless, and similar materials. It is packaged and sold as a single disc, making it appropriate for spot replacement or low-volume use.

Key Features

• 2-inch diameter fits standard quick-change mandrel systems
• Silicon carbide abrasive — effective on non-ferrous metals and hard alloys
• Fine grade delivers controlled material removal with a smooth resulting surface
• Quick-change connector reduces disc swap time in production environments
• 0.25-inch thickness maintains disc stability during edge and contour deburring

Compatibility

Designed for use with quick-change mandrel systems that accept 2-inch diameter quick-change deburring discs. No specific tool or system compatibility data was provided in the product input.

Installation Notes

Installation requires a compatible quick-change mandrel mounted in a rotary tool, die grinder, or drill press. Ensure the tool is powered off and unplugged before mounting or removing the disc. Inspect the disc for cracks or damage before each use and do not exceed the rated RPM for the disc. Eye protection and appropriate PPE are required during abrasive operations per standard shop safety practice.