Standard Abrasives 7000046865 Quick-change Disc 2in Ao Coarse

Product Description

The STANDARD ABRASIVES 7000046865 is a 2-inch quick-change abrasive disc designed for surface conditioning, blending, and light material removal on metal and similar substrates. Built with an aluminum oxide non-woven construction, this coarse-grade disc cuts aggressively while conforming to irregular surfaces. It attaches via a Type R Lockit system, allowing fast one-handed disc swaps without additional hardware. The brown non-woven pad resists loading and provides consistent cut rate throughout the disc life. Licensed trades and fabrication shops use this disc for weld blending, edge deburring, and surface prep work ahead of coating or inspection.

This disc is suited for use on angle grinders, die grinders, and right-angle tools equipped with a Type R Lockit mandrel. Typical applications include weld seam blending on structural steel, surface conditioning on stainless and carbon steel, and pre-paint prep on sheet metal. The non-woven aluminum oxide construction is well matched to tasks where a consistent scratch pattern is required rather than aggressive stock removal. The coarse grade makes it appropriate for initial prep passes rather than finish work. Sheet metal fabricators, pipefitters, and maintenance mechanics are the primary installers and users of this disc.

Key Features

• 2-inch disc diameter fits compact grinders and die grinders with Type R Lockit mandrels
• Aluminum oxide non-woven construction resists loading and delivers consistent cut rate
• Coarse grade suited for weld blending, deburring, and surface prep
• Type R Lockit attachment system enables fast one-handed disc changes
• Rated to 30,000 RPM maximum for use on high-speed die grinders
• Brown disc color and white button for quick visual identification in the Series RC lineup

Compatibility

Designed for use with Type R Lockit quick-change mandrels on angle grinders and die grinders rated for 2-inch accessories at or below 30,000 RPM.

Installation Notes

Installation is performed by pressing the disc onto a compatible Type R Lockit mandrel until it seats and locks. Verify the tool spindle speed does not exceed the 30,000 RPM disc rating before operating. Always power down and disconnect the tool from the power source before mounting or removing the disc. Eye protection and appropriate PPE are required during operation in accordance with applicable ANSI and workplace safety standards.