Speco O8FB1M 4K Ip Bullet Camera 3-12mm Ir Ai Plus

Product Description

The SPECO O8FB1M is a 4K IP bullet camera built for demanding outdoor surveillance installations. It features a 3-12mm varifocal lens with motorized or manual adjustment range, intense infrared illumination for low-light and nighttime coverage, and an IP67-rated housing for full dust and water ingress protection. The camera integrates AI-plus video analytics for on-board intelligent detection functions. Delivered in a gray finish, it is designed for installation by security integrators and licensed low-voltage technicians in commercial and institutional applications where high-resolution image capture is required around the clock.

The O8FB1M suits outdoor perimeter monitoring, parking structures, building entrances, and wide-area surveillance where 4K resolution is needed to capture usable detail at distance. The varifocal lens range of 3-12mm allows the installer to dial in a field of view from wide-angle entry coverage to a tighter mid-range shot without changing the camera body. The IR intensity system adjusts illumination output to avoid washout on close targets while still reaching subjects at longer distances. It is appropriate for both new construction and retrofit projects wherever an IP network drop is accessible.

Key Features

• 4K image resolution for high-detail capture at extended distances
• 3-12mm varifocal lens for flexible field-of-view adjustment on installation
• Intense IR illumination for low-light and full-darkness operation
• AI-plus on-board analytics for intelligent detection and event filtering
• IP67-rated housing rated for full dust ingress protection and temporary water immersion
• Gray finish suitable for standard exterior mounting on walls, soffits, or pole brackets

Compatibility

Designed for use on IP-based video surveillance networks; confirm NVR or VMS platform supports the camera resolution and onvif or proprietary stream format prior to installation.

Installation Notes

Installation should be performed by a licensed low-voltage or security systems technician following applicable local codes and NEC Article 725 guidelines for low-voltage cabling. Power down the network switch port or PoE injector before making cable terminations at the camera. Mount the housing to a structurally sound surface using appropriate anchors rated for the combined weight of the camera and any junction box. Verify IP67 seal integrity at all conduit entries and cable pass-throughs before commissioning.