Speco O4VD2G 4MP Ir Ai Dome Ip Camera IP67 IK10

Product Description

The SPECO O4VD2G is a 4-megapixel IP dome camera built for demanding indoor and outdoor surveillance installations. It delivers high-resolution video capture with integrated infrared illumination for low-light and nighttime performance. An onboard AI engine supports intelligent video analytics at the edge, reducing backend processing load. The built-in microphone adds audio capture without requiring a separate device. Rated IP67 for dust and water ingress protection and IK10 for impact resistance, this camera is engineered for environments where exposure to weather or physical contact is a concern. Security integrators and low-voltage technicians are the primary installers.

The O4VD2G suits commercial and residential security deployments where a discreet dome form factor is required. Its gray housing blends into typical ceiling and soffit installations. The IP67 rating makes it suitable for covered outdoor mounting locations such as building overhangs, parking structures, and entry canopies. The IK10 vandal-resistant rating adds suitability for public-facing locations such as retail floors, hallways, stairwells, and transit facilities. The 2.8mm fixed lens provides a wide field of view appropriate for room coverage and entry monitoring.

Key Features

• 4MP resolution for detailed image capture in commercial and residential applications
• Integrated infrared illumination for nighttime and low-light performance
• Onboard AI for edge-based video analytics
• Built-in microphone for simultaneous audio and video recording
• IP67-rated dust and waterproof housing for outdoor use
• IK10 vandal-resistant dome cover for high-traffic and public-facing locations

Compatibility

Designed as an OEM-style IP dome camera compatible with standard ONVIF-compliant network video recorders and video management systems accepting 4MP IP camera streams.

Installation Notes

Installation should be performed by a licensed low-voltage technician familiar with IP camera infrastructure and applicable local codes. Power down the network switch port or PoE injector before making wiring connections. Ensure the mounting surface can support the camera weight and that conduit or cable routing provides adequate weatherproofing at the entry point. Do not overtighten the dome housing fasteners, as this may compromise the IP67 seal.