Spears 54211168639 Pvc Sch 80 Socket 90 Elbow 3/4 in

Product Description

The SPEARS 54211168639 is a 3/4 inch Schedule 80 PVC 90 degree elbow with socket ends, molded from PVC Type I (cell classification 12454) in compliance with ASTM D2467. Rated at 150 psi non-shock at 73 degrees F, this fitting is certified for potable water service by NSF International. The gray, heavy-wall construction meets the demands of industrial, commercial, and residential pressure piping systems. Plumbers and pipefitters specify Schedule 80 fittings where thicker walls and higher pressure ratings are required compared to Schedule 40. This elbow is manufactured domestically by Spears Manufacturing to ASTM D1784 material standards.

This fitting is suited for pressure piping applications in commercial plumbing, industrial process lines, irrigation systems, and chemical distribution where PVC is appropriate for the service fluid. The socket end configuration accepts 3/4 inch PVC pipe for solvent-cement joining. It is commonly installed in systems requiring a clean 90 degree directional change in the pipe run. The domestic manufacturing designation and NSF certification make it a suitable choice for potable water installations where code compliance documentation is required.

Key Features

• Schedule 80/XH wall thickness rated for 150 psi non-shock service at 73 degrees F
• Injection molded PVC Type I, cell classification 12454 per ASTM D1784
• NSF International certified for potable water service per ASTM D2467
• Socket ends for standard solvent-cement joining to 3/4 inch PVC pipe
• Gray color consistent with Schedule 80 PVC pressure fittings convention
• Domestically manufactured by Spears Manufacturing

Compatibility

Designed as an OEM-style pressure fitting for use with 3/4 inch Schedule 80 PVC pressure pipe in solvent-cement socket systems conforming to ASTM D2467.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters following applicable IPC and local plumbing code requirements. Depressurize and drain the line completely before cutting into an existing system. Use PVC-rated solvent cement and primer appropriate for Schedule 80 fittings; allow full cure time before pressurizing per the cement manufacturer instructions. Do not exceed the pressure or temperature ratings marked for this fitting.

Technical Specifications

• Nominal Size: 3/4 inch
• Schedule Rating: SCH 80/XH
• Pressure Rating: 150 psi (non-shock)
• Temperature Rating: 73 degrees F
• Material: PVC Type I, Cell Classification 12454
• End Style: Socket
• Fitting Type: 90 Degree Elbow
• Method of Manufacture: Molded
• Color: Gray
• Certifications: NSF International, ASTM D2467, ASTM D1784
• Origin: Domestic

Standard Information

• Brand: SPEARS
• Manufacturer Part Number: 54211168639