Spears 54211168592 Pvc Sch 80 Socket 45 Elbow 3/4 in

Product Description

The SPEARS 54211168592 is a 3/4 inch Schedule 80 PVC socket 45-degree elbow fitting manufactured domestically for pressure piping systems. Produced from PVC Type I, cell classification 12454, this molded fitting conforms to ASTM D1784 and ASTM D2467 and is certified by NSF International for potable water service. Rated at 150 psi non-shock at 73 degrees F, it is suitable for residential, commercial, and industrial plumbing and process piping applications. The gray Schedule 80 wall thickness provides greater pressure resistance than Schedule 40 fittings of the same nominal size. Licensed plumbers and pipefitters install this fitting in systems requiring reliable directional changes at a 45-degree angle.

This elbow is used in Schedule 80 PVC pressure piping systems across a wide range of applications including potable water distribution, irrigation, chemical handling, and industrial process lines. The 3/4 inch socket-style end connection accepts solvent-cement joining, making it compatible with standard SCH 80/XH PVC pipe of the same nominal diameter. It is appropriate for both above-ground and below-ground installations where the operating temperature does not exceed 73 degrees F at maximum rated pressure.

Key Features

• Schedule 80/XH wall thickness rated to 150 psi non-shock at 73 degrees F
• PVC Type I, cell classification 12454 per ASTM D1784
• NSF International certified for potable water service per ASTM D2467
• Injection molded construction for consistent dimensional accuracy
• Socket end style accepts solvent-cement joining with standard SCH 80 PVC pipe
• Domestically manufactured in gray PVC

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 80/XH PVC pressure piping systems using 3/4 inch nominal socket connections.

Installation Notes

Installation should be performed by a licensed plumber following applicable IPC and local plumbing code requirements. Depressurize and drain the system fully before cutting into any existing line. Use a compatible PVC solvent cement and primer rated for Schedule 80 pressure service, and allow full cure time before restoring pressure. Do not exceed the fitting's rated pressure or temperature limits in service.

Technical Specifications

• Nominal Size: 3/4 inches
• Schedule Rating: SCH 80/XH
• Pressure Rating: 150 psi non-shock
• Temperature Rating: 73 degrees F
• Material: PVC Type I, Cell Classification 12454
• End Style: Socket
• Fitting Type: 45 Degree Elbow
• Method of Manufacture: Molded
• Color: Gray
• Certifications: NSF International, ASTM D1784, ASTM D2467
• Country of Origin: Domestic

Standard Information

• Brand: SPEARS
• Manufacturer Part Number: 54211168592