Southwire R20047-1D 22 Awg 6 Conductor Communication Cable

Product Description

The SOUTHWIRE R20047-1D is a 22 AWG, 6-conductor unshielded automation communication cable designed for low-voltage control and data signaling applications in commercial and residential systems. The cable features a bare copper conductor with fiber-reinforced polypropylene and polypropylene insulation, covered by a PVC jacket with a 0.161-inch outside diameter. It carries UL Type CM/CL2 and CMX Outdoor ratings, making it suitable for both indoor and outdoor installations. This cable is sold in 1-foot cut increments with a minimum cut length of 250 feet per order from a 500-foot total coil. It is RoHS compliant and sun-resistant, supporting long-term performance in exposed runs.

This cable is commonly used in building automation, HVAC controls, access control, and low-voltage communication systems where an unshielded multi-conductor cable is specified. Its CMX Outdoor rating allows installation in direct-sun exterior conduit runs or outdoor-rated pathways. The temperature rating of -4 degrees F to 167 degrees F covers most North American climate conditions. Licensed electricians and low-voltage communication technicians typically install this cable in commercial retrofit and new-construction projects where NEC Article 725 Class 2 wiring methods apply.

Key Features

• 22 AWG bare copper conductors for reliable low-voltage signal transmission
• 6-conductor configuration suits multi-zone automation and control wiring
• PVC jacket with CMX Outdoor rating for indoor and direct-sun exterior use
• Sun-resistant construction extends service life in exposed outdoor runs
• UL Type CM/CL2 and CMX Outdoor listed; NEC Article 725 compliant
• RoHS compliant per 2011/65/EU directive
• Available in 1-foot cut increments with a 250-foot minimum cut length

Compatibility

Designed as a standard 22 AWG 6-conductor unshielded communication cable for use in automation, HVAC control, and low-voltage signaling applications where UL Type CM/CL2 or CMX Outdoor cable is specified per NEC Article 725.

Installation Notes

Installation should be performed by a licensed electrician or certified low-voltage technician in accordance with NEC Article 725 and all applicable local codes. De-energize all circuits before making connections. For outdoor or plenum routing, verify the installation pathway is rated for the cable type being used. Avoid sharp bends that exceed the cable minimum bend radius, and do not install alongside high-voltage conductors without appropriate separation.