Southwire LBLA200CB 2 Inch Aluminum Lb Conduit Body

Product Description

The SOUTHWIRE LBLA200CB is a 2-inch aluminum LB-type conduit body supplied with a matching cover and gasket. LB conduit bodies provide a 90-degree pull point in conduit runs, allowing wire to be pulled through corners and transitions in electrical raceway systems without exceeding bend radius limits. The aluminum construction keeps weight low while delivering the corrosion resistance required in exposed or damp-location installations. The included cover and gasket create a sealed enclosure at the pull point, protecting conductors from moisture and contaminants. Licensed electricians install this fitting in commercial and residential conduit systems as part of a code-compliant raceway assembly.

This conduit body is suited for 2-inch rigid metal conduit or intermediate metal conduit runs where a direction change is needed. Typical applications include service entrance work, feeder runs in commercial buildings, industrial conduit systems, and outdoor exposed installations where a gasketed cover is required for environmental protection. The LB configuration exits through the back of the body, making it the standard choice for routing conduit along walls and into enclosures.

Key Features

• LB-type body provides a 90-degree pull point for 2-inch conduit runs
• Aluminum construction offers corrosion resistance and reduced weight compared to iron bodies
• Includes matching cover and gasket for a sealed, moisture-resistant closure
• Compatible with rigid metal conduit and intermediate metal conduit in 2-inch trade size
• One year limited warranty

Compatibility

Designed as an OEM-style replacement or direct-install fitting for 2-inch trade-size rigid metal conduit and intermediate metal conduit raceway systems.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and verify absence of voltage before opening or working near the conduit system. Ensure the conduit body is properly supported and that all threaded connections are wrench-tight before pulling conductors. Do not exceed the conductor fill capacity calculated per NEC Article 314 for the selected conduit body size.