Southwire/coleman Cable 63946823 14/3 Nm-b Cable 100 Feet

Product Description

The SOUTHWIRE/COLEMAN CABLE 63946823 is a 100-foot roll of 14/3 non-metallic sheathed cable with ground (NM-B), designed for general-purpose residential and light commercial electrical wiring. The cable is constructed with copper conductors rated to 90 degrees F and comes in a cut-length format, making it practical for rough-in work, branch circuit runs, and outlet or fixture feeds. Licensed electricians stock this gauge for 15-amp branch circuits where a neutral, hot, and ground conductor are all required in a single sheath.

This 14/3 NM-B cable is used in residential construction and renovation projects for applications requiring three conductors plus a bare ground, such as switch loops with neutral, three-way switch wiring, and split-receptacle circuits. The 100-foot roll length suits single-room rough-ins and panel feeder drops without excess waste. It is appropriate for dry, damp-rated interior installations where NM-B cable is permitted by local code.

Key Features

• 100-foot cut length roll, ready for single-circuit rough-in work
• 14/3 configuration: three copper conductors plus bare ground in one sheath
• NM-B rated sheathing for dry and damp interior installations
• 90 degrees F conductor temperature rating
• Copper conductors for reliable conductivity and code compliance
• Suits 15-amp branch circuits per NEC Article 334

Compatibility

Designed as a standard NM-B replacement and new-installation cable for residential branch circuits requiring a 14 AWG three-conductor-plus-ground configuration in accordance with applicable NEC guidelines.

Installation Notes

Installation must be performed by a licensed electrician in accordance with NEC Article 334 and applicable local codes. Always de-energize the circuit and verify zero voltage at the panel before pulling or terminating cable. NM-B cable is not rated for direct burial, wet locations, or exposed exterior runs. Secure and protect the cable per NEC stapling and protection requirements to avoid physical damage during and after installation.