Southwire/coleman Cable 28829021 10/2 Nm-b Wire 25 Ft

Product Description

The SOUTHWIRE/COLEMAN CABLE 28829021 is a 25-foot length of 10/2 non-metallic sheathed cable with ground (NM-B), rated for 90 degrees C and constructed with solid copper conductors. This cable is a cut-length section of standard Romex-style NM-B wiring, designed for residential and light commercial electrical rough-in work. It carries two current-carrying conductors plus a bare copper ground wire, all enclosed in a PVC jacket that meets NM-B specifications. Electricians use this gauge for branch circuits requiring higher ampacity than 12 AWG, including appliance feeds, range outlets, dryer circuits, and HVAC disconnect feeds.

10/2 NM-B cable is suited for dry and damp interior locations in wood-framed residential construction. Common applications include 30-amp branch circuits feeding electric dryers, water heaters, air conditioning units, and other high-draw appliances. The 25-foot cut length is practical for shorter runs, panel-to-disconnect wiring, and service calls that do not require a full roll. Package quantity is 5 rolls per case.

Key Features

• 10 AWG, 2-conductor with bare copper ground (10/2 W/G)
• 90 degrees C temperature rating for NM-B applications
• Solid copper conductors for reliable conductivity and code compliance
• 25-foot cut length reduces waste on shorter runs
• NM-B jacket rated for dry and damp interior installations

Compatibility

Designed as a standard NM-B replacement or new-installation cable for residential and light commercial branch circuits requiring 10 AWG two-conductor wiring with ground.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Always de-energize the circuit and verify zero voltage at the panel before making any connections. NM-B cable is approved for concealed dry and damp interior locations only and must not be installed in conduit where prohibited or exposed to direct sunlight, wet locations, or corrosive environments. Secure and protect cable runs per NEC Article 334 requirements.