Southwire/coleman Cable 28828222 12/2 Nm-b Wire 50 Ft

Product Description

The SOUTHWIRE/COLEMAN CABLE 28828222 is a 50-foot cut length of 12/2 non-metallic sheathed cable with ground (NM-B), rated for 90 degrees F service. Constructed with copper conductors, this cable meets standard residential branch-circuit requirements for 20-amp circuits. The outer thermoplastic jacket identifies it as NM-B type, suitable for dry, protected indoor locations. Licensed electricians use this cable for outlets, lighting circuits, and general-purpose branch wiring in wood-framed residential and light commercial construction. The 12 AWG conductor size supports 20-amp circuit loads under NEC guidelines.

This cable is used in residential new construction, renovation wiring, and service upgrades where 20-amp branch circuits are required. Typical applications include kitchen outlet circuits, bathroom circuits, and general-purpose receptacle runs. The 50-foot cut length suits single-circuit or partial-circuit runs without the need to purchase a full spool. Each length ships as a roll. Package quantity is 10 rolls per case.

Key Features

• 12/2 configuration with ground — two 12 AWG current-carrying conductors plus a bare copper ground
• Copper conductors for reliable conductivity and compatibility with standard terminations
• 90 degrees F temperature rating for NM-B dry-location service
• 50-foot cut length — ready for single-circuit branch runs
• NM-B sheathing suitable for concealed wiring in wood-framed structures

Compatibility

Designed as a standard NM-B type replacement and new-work cable for 20-amp, 120-volt or 240-volt residential branch circuits installed in dry, concealed locations per NEC Article 334.

Installation Notes

Installation must be performed by a licensed electrician in accordance with NEC Article 334 and all applicable local codes. Always de-energize the circuit at the breaker panel and verify zero voltage with a meter before making terminations. NM-B cable must not be used in wet, damp, or exposed locations, or where subject to physical damage. Secure and support the cable at intervals required by the NEC and protect it where it passes through framing members.