Southwire/coleman Cable 28827472 14/2 Nm-b Cable 450 Ft

Product Description

The SOUTHWIRE/COLEMAN CABLE 28827472 is a 450-foot spool of 14/2 non-metallic sheathed cable with ground, commonly known as NM-B or Romex-type cable. It carries two 14 AWG copper conductors plus a bare copper ground, all wrapped in a PVC outer jacket rated for 90 degrees C. This cable is designed for dry, indoor branch-circuit wiring in residential construction and light commercial applications. Licensed electricians use it to run circuits for lighting, outlets, and small appliances during rough-in or retrofit work. The copper conductors provide reliable conductivity and are compatible with standard residential panels and devices.

This 14/2 NM-B cable is suited for 15-amp branch circuits in residential buildings, including single-family homes, townhouses, and light commercial occupancies where NM cable is code-permitted. It ships on a merchandising spool that feeds cleanly through framing bays and conduit entries, reducing snags during installation. The 450-foot length is practical for full-floor rough-in runs or multiple shorter circuits off a single spool.

Key Features

• 14/2 configuration with bare copper ground conductor included
• Solid copper conductors rated for dependable conductivity on 15-amp circuits
• 90 degrees C temperature rating on conductors for safe operation in typical wall cavities
• 450-foot merchandising spool minimizes mid-run splices on larger jobs
• NM-B jacket rated for dry, concealed indoor installations per NEC guidelines

Compatibility

Designed as a standard NM-B replacement or new-construction supply cable for residential and permitted light commercial branch circuits requiring 14 AWG two-conductor-with-ground wiring.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out the circuit panel before making any connections. NM-B cable is approved for dry, concealed locations only and must not be run in wet areas, exposed exterior surfaces, or embedded in concrete without appropriate conduit protection. Staple or strap the cable at intervals required by the NEC to prevent sagging or damage.