Southwire/coleman Cable 28827401 14/2 Nm-b Wire 1000 Ft Reel

Product Description

The SOUTHWIRE/COLEMAN CABLE 28827401 is a 1,000-foot reel of 14/2 non-metallic sheathed cable with ground, commonly known as NM-B or Romex-style cable. It consists of two 14 AWG copper conductors plus a bare copper ground, all enclosed in a PVC outer jacket rated for 90 degrees F dry locations. This cable is a standard supply item for licensed electricians running branch circuits in residential and light commercial construction. The 1,000-foot reel format reduces handling time on larger jobs and keeps the wire feeding cleanly from a reel stand during rough-in work.

14/2 NM-B cable is used for general-purpose 15-amp branch circuits in residential wiring applications, including lighting circuits, receptacle circuits, and similar loads. It is designed for dry, concealed interior installations such as inside wall cavities, floor joists, and attic runs. The copper conductors provide reliable conductivity and are compatible with standard 15-amp breakers and devices. This product ships on a reel, making it practical for new construction, remodel work, and service upgrades where large footage pulls are required.

Key Features

• 14 AWG solid copper conductors for reliable branch-circuit performance
• Two conductors plus bare copper ground in a single NM-B assembly
• 90 degrees C thermal rating for dry interior installations
• 1,000-foot reel format reduces wire handling time on larger jobs
• PVC outer sheath meets NM-B cable standards for concealed residential wiring

Compatibility

Designed as an OEM-style supply for standard 15-amp residential branch circuits wired with 14 AWG NM-B cable per NEC Article 334 requirements.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Always de-energize the panel and verify circuits are dead with a meter before making any connections. NM-B cable is approved for dry, concealed interior locations only and must not be installed in wet, damp, or exposed exterior environments. Secure and protect the cable at required intervals per NEC guidelines, and avoid sharp bends that could damage the jacket or conductors.