Southwire/coleman Cable 22975783 Thhn Wire 10 Awg 50 Ft Red

Product Description

The SOUTHWIRE/COLEMAN CABLE 22975783 is a 50-foot length of 10 AWG stranded copper THHN building wire in red. This wire is rated for 600 volts and 90 degrees C, making it suitable for branch circuit wiring in conduit runs across residential and light commercial applications. The nylon jacket provides abrasion resistance and eases pulling through conduit. Stranded construction improves flexibility compared to solid wire, which is a practical advantage when routing through tight bends or junction boxes. Licensed electricians and electrical contractors are the typical installers for this type of wire.

Type THHN wire is one of the most widely used wire types in electrical construction. It is well suited for interior conduit installations in dry or damp locations, including service entrance feeders, branch circuits, and panel connections. The red jacket color aids in circuit identification during installation and future service work. This 50-foot spool format is practical for smaller jobs or supplemental pulls where a full 500-foot or 1000-foot reel is not warranted.

Key Features

• Type THHN insulation with nylon outer jacket for conduit pull ease and abrasion resistance
• 10 AWG stranded copper construction for flexibility in conduit routing
• 600V voltage rating suitable for standard branch circuit and feeder applications
• 90 degrees C temperature rating for dry and damp location use
• Red jacket color for phase identification and circuit tracing
• Supplied on a plastic spool for controlled dispensing on the job

Compatibility

Designed for use as a general-purpose THHN building wire in standard conduit systems including EMT, rigid metal, and PVC conduit where 10 AWG copper conductors are specified.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out the circuit or panel before making any terminations. THHN wire is rated for conduit installation in dry or damp locations and is not rated for direct burial or wet locations unless paired with a wet-rated conduit system. Avoid over-pulling or kinking the wire during fish and pull operations to prevent insulation damage.