Southwire/coleman Cable 13056721 10/2 Ufb Cable 25 Ft 600V

Product Description

The SOUTHWIRE/COLEMAN CABLE 13056721 is a 10/2 Underground Feeder and Branch Circuit (UFB) cable rated at 600 volts, supplied in a 25-foot coil. It features solid or stranded copper conductors encased in a sunlight-resistant, moisture-resistant, and fungus-resistant PVC jacket. This cable is engineered for direct-burial applications where a reliable, durable feeder or branch circuit run is required below grade or in wet locations. Licensed electricians install this cable in residential and light commercial settings where underground routing from a service panel or subpanel to an outbuilding, landscape feature, or exterior load is needed.

This 10/2 UFB cable is suited for underground feeder and branch circuit wiring in residential and light commercial installations. Typical applications include runs to detached garages, sheds, pool equipment panels, outdoor lighting circuits, and other exterior loads requiring a direct-burial-rated conductor. The 25-foot coil length is practical for shorter runs and retrofit jobs. The 600-volt rating accommodates standard single-phase branch circuit voltages used in residential service.

Key Features

• 600-volt rating suitable for standard residential and light commercial branch circuits
• Copper conductors provide reliable conductivity and code-accepted performance
• PVC jacket rated for sunlight, moisture, and fungus resistance
• Approved for direct-burial and underground feeder applications
• 25-foot coil length sized for shorter runs and service calls

Compatibility

Designed as a direct-burial UFB cable for use in underground feeder and branch circuit applications where a 10/2 with ground, 600-volt rated cable is specified per NEC requirements.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the circuit at the breaker panel and verify the circuit is dead before making any connections. UFB cable requires minimum burial depth as specified by NEC Article 340; confirm local amendments before trenching. Avoid sharp bends or kinking the cable during pulling and backfill operations.