Southwire 94038907 Extension Cord 13A 125V 16/2 12 Ft

Product Description

The SOUTHWIRE 94038907 is a 12-foot, two-conductor indoor extension cord rated for 13 amps at 125 volts AC. Built to SPT-2 construction standards, it uses 16 AWG stranded wire with a brown vinyl jacket suited for general-purpose interior use. The cord terminates with a NEMA 1-15P plug on one end and provides a single NEMA 1-15R receptacle outlet. It carries both UL and cUL listings, confirming it meets North American safety requirements for indoor electrical applications. Electricians, maintenance technicians, and facility staff use this cord for temporary power runs to light-duty equipment in residential and commercial indoor settings.

This extension cord is designed for indoor environments only. Its 16/2 AWG SPT-2 construction handles resistive loads such as lamps, fans, and small appliances drawing up to 13 amps. The 12-foot length suits workbench setups, equipment staging areas, and general indoor service work where a short, manageable run is needed. It is not rated for outdoor, wet, or damp location use.

Key Features

• 13-amp, 125-volt AC rating for light-duty indoor loads
• 16 AWG, 2-conductor SPT-2 construction with brown vinyl jacket
• 12-foot overall length for short indoor power runs
• NEMA 1-15P plug and NEMA 1-15R receptacle configuration
• UL Listed and cUL Listed for North American compliance

Compatibility

Designed as a general-purpose indoor extension cord compatible with NEMA 1-15 two-prong receptacles and plug configurations standard in residential and light commercial indoor installations.

Installation Notes

This cord is for temporary indoor use only and should not be routed through walls, ceilings, or floors as a permanent wiring method per NEC guidelines. Do not exceed the 13-amp current rating or connect to outdoor, wet, or damp locations. Inspect the cord jacket and plug blades for damage before each use and replace if insulation is cracked or conductors are exposed. Installation and temporary power distribution in commercial settings should be performed by a qualified electrician in accordance with applicable local codes.