Southwire 63948455 10/3 Nm-b Wire with Ground 250 Ft

Product Description

The SOUTHWIRE COLEMAN CABLE 63948455 is a 250-foot roll of 10/3 non-metallic sheathed cable with ground (NM-B), rated for use in dry indoor applications. This cable features three 10 AWG copper conductors plus a ground, enclosed in a PVC outer jacket rated for 90 degrees C. It is designed for general-purpose branch circuit wiring in residential and light commercial construction. Electricians use this cable for circuits feeding 240-volt appliances, dryers, ranges, water heaters, and HVAC equipment requiring a dedicated circuit. The cable ships boxed on a 250-foot reel for clean, tangle-free pulls on the job.

This 10/3 NM-B cable is suited for residential branch circuit installations in dry, protected indoor locations. Typical applications include dedicated 30-amp or larger circuits for kitchen appliances, electric dryers, and HVAC disconnect feeds. It is appropriate for installation in wood-frame walls, through bored studs, and stapled along framing members per NEC guidelines. The boxed reel format makes it practical for both rough-in work and smaller service upgrade jobs without the bulk of a full spool.

Key Features

• 10/3 configuration with full copper conductors and ground for 240-volt branch circuits
• 90 degrees C temperature rating for safe use in warm indoor environments
• NM-B sheathing rated for dry indoor residential and light commercial use
• 250-foot length ships boxed for clean, controlled payout on the job
• Solid or stranded copper construction provides reliable conductivity and long service life

Compatibility

Designed as an OEM-style replacement and general-use 10/3 NM-B cable for residential and light commercial branch circuit wiring applications per NEC Article 334.

Installation Notes

Installation must be performed by a licensed electrician in accordance with NEC Article 334 and all applicable local codes. De-energize the panel and verify zero voltage before terminating conductors. NM-B cable must not be used in wet or damp locations, exposed exterior runs, or embedded in concrete. Secure cable with listed staples or straps at intervals required by the NEC, and protect cable running through framing with nail plates where required.