Southwire 55082121 Flexible Aluminum Conduit 1/2 in 25 Ft

Product Description

The SOUTHWIRE 55082121 is a reduced-wall flexible aluminum metal conduit (LFMC) sold in a 25-foot roll at 1/2 inch trade size. It provides the structural strength and durability expected from flexible metal conduit while weighing roughly one-third less than comparable steel conduit. The aluminum construction resists corrosion in light-duty environments and maintains the flexibility needed to route wiring around obstructions, equipment, and tight spaces. Licensed electricians install this conduit in commercial and residential wiring applications where a lightweight, code-compliant flexible raceway is required. At 2.6 pounds per roll, it is easy to handle and maneuver on the job site.

This conduit is suited for use in standard electrical installations where flexibility and reduced weight are priorities. It is compatible with standard conduit connectors and device boxes, making integration into existing raceway systems straightforward. Common applications include connections to HVAC equipment, motors, lighting fixtures, and other electrical loads that require a short flexible raceway section at the final connection point. It is appropriate for both new construction and retrofit work in residential and light commercial settings.

Key Features

• Reduced-wall aluminum construction weighs approximately one-third less than steel flexible conduit
• Meets UL Standard 1 for flexible metal conduit
• Compliant with NEC Article 350 governing liquidtight and flexible metal conduit installations
• Meets Federal Specification WW-C 566C
• Compatible with standard conduit connectors and device boxes — no special fittings required
• Sold as a 25-foot roll for convenient job-site use

Compatibility

Designed for use with standard 1/2 inch conduit connectors and device boxes. No specific model or system compatibility was stated by the manufacturer beyond general compliance with NEC Article 350 and UL Standard 1.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 350 and all applicable local codes. De-energize the circuit completely before making any connections to the conduit system. Use listed 1/2 inch conduit fittings rated for flexible metal conduit to terminate each end securely. Avoid sharp bends that exceed the minimum bend radius for the trade size, as this can damage the conduit wall and restrict wire pulling.

Technical Specifications

• Trade Size: 1/2 inch
• Length: 25 feet
• Material: Aluminum
• Weight: 2.6 pounds
• UOM: Roll
• Standards: UL Standard 1, NEC Article 350, Federal Specification WW-C 566C

Standard Information

• Brand: SOUTHWIRE
• Manufacturer Part Number: 55082121