Southwire 55062864 10/4 Sjeoow Replacement Cord 25A 300V

Product Description

The SOUTHWIRE 55062864 is a 10/4 SJEOOW flexible replacement cord rated for 25 amps at 300 volts, supplied in a 250-foot coil and sold in 1-foot increments with a 125-foot minimum cut length. Built with four 10 AWG conductors and a black jacket, this cord is engineered for both indoor and outdoor use in demanding trade environments. The SJEOOW designation indicates a hard-service, oil-resistant, weather-resistant construction suitable for portable equipment, power distribution setups, and industrial connections. Licensed electricians and experienced electrical tradespeople are the primary installers for this type of flexible cord assembly.

This replacement cord is suited for residential, commercial, and light industrial applications where a heavy-duty flexible connection is required between portable equipment and a power source. Its outdoor-rated jacket handles moisture and temperature variation, making it practical for job-site temporary power, pump hookups, and equipment feeds. The cord meets NEC Article 400 requirements for flexible cord use and is recognized under NEC Article 501.140 Class I Division 2, allowing use in certain classified hazardous locations where that classification applies.

Key Features

• 10 AWG, 4-conductor construction rated at 25 amps and 300 volts
• SJEOOW jacket is oil-resistant and weather-resistant for indoor and outdoor service
• Sold in 1-foot increments from a 250-foot coil with a 125-foot minimum cut length
• Listed under UL 62 and certified to CSA C22.2 No. 49 and CSA FT2 Flame Test standards
• Compliant with RoHS, TCLP Method, EPA 40 CFR Part 26 Subpart C, and MSHA requirements
• Recognized under NEC Article 501.140 Class I Division 2 for use in qualifying hazardous locations

Compatibility

Designed as a replacement flexible cord for portable tools, equipment, and power distribution applications requiring a 10 AWG, 4-conductor, outdoor-rated SJEOOW cord at 25 amps and 300 volts.

Installation Notes

Installation and termination of this flexible cord should be performed by a licensed electrician in accordance with NEC Article 400 and applicable local codes. De-energize all circuits and verify zero voltage at the termination points before making any connections. Do not use this cord in fixed wiring applications or in conduit runs where flexible cord is not permitted by code. Inspect the jacket for cuts or abrasion before placing the cord in service, particularly in outdoor or high-traffic job-site environments.