Southwire 55044801 10/3 Sjeoow Replacement Cord 30A 300V

Product Description

The SOUTHWIRE 55044801 is a 10/3 SJEOOW replacement cord rated for 30 amps and 300 volts, designed for demanding indoor and outdoor electrical applications. This three-conductor, 10 AWG cord is constructed to the SJEOOW designation, meaning it carries an oil-resistant outer jacket and oil-resistant conductor insulation, making it suitable for environments where exposure to moisture, oils, and temperature extremes is a concern. The cord is sold in 1-foot increments with a minimum cut length of 125 feet from a 250-foot coil. Electricians and maintenance professionals use this cord for replacement wiring on portable tools, equipment, and temporary power applications where a rugged, flexible conductor is required.

This cord is appropriate for residential, commercial, and light industrial settings where a flexible replacement cord rated for outdoor exposure is needed. Its SJEOOW rating makes it a common choice for replacement cords on compressors, generators, power tools, and similar equipment that operate in environments subject to moisture or oil exposure. The black jacket blends standard serviceability with durability across varying installation environments.

Key Features

• 10 AWG, 3-conductor construction rated at 30 amps and 300 volts
• SJEOOW designation: oil-resistant jacket and oil-resistant conductor insulation
• Rated for both indoor and outdoor use
• Sold in 1-foot increments; minimum cut length is 125 feet from a 250-foot coil
• Meets UL 62, CSA C22.2 No. 49, NEC Article 400, MSHA, and RoHS compliance standards
• CSA FT2 flame-test rated and compliant with NEC Article 501.140 Class I Division 2

Compatibility

Designed as a flexible replacement cord for portable equipment and tools requiring a 10/3 SJEOOW-rated conductor in indoor or outdoor service environments.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 400 and any applicable local codes. Disconnect and de-energize all equipment before replacing or terminating this cord. Do not exceed the 30-amp or 300-volt ratings of the cord. Verify that termination hardware and connectors are rated to match the cord gauge and ampacity before placing the assembly into service.