Southwire 55043503 16/4 Sjeoow Replacement Cord 10A 300V

Product Description

The SOUTHWIRE 55043503 is a 16 AWG, 4-conductor SJEOOW replacement cord rated for 10 amps at 300 volts. It is designed for use as a flexible service cord in both indoor and outdoor environments where oil, water, and weather resistance are required. The SJEOOW jacket designation indicates a junior hard-service cord with oil-resistant inner and outer insulation, making it suitable for demanding field conditions. Electricians and maintenance technicians use this cord for equipment replacement wiring, portable tool applications, and industrial service drops where a flexible, multi-conductor cord is specified. It is sold in 1-foot increments with a minimum cut length of 125 feet from a 250-foot coil.

This cord is appropriate for residential, commercial, and light industrial applications where a flexible 4-conductor replacement cord is needed. Its outdoor-rated jacket handles exposure to moisture, sunlight, and incidental oil contact. Common install scenarios include replacement wiring on portable equipment, HVAC accessories, and outdoor power distribution drops. The cord meets NEC Article 400 and NEC Article 501.140 Class I Division 2 requirements, making it viable in certain classified hazardous location wiring applications where SJEOOW-type cord is permitted by the authority having jurisdiction.

Key Features

• SJEOOW construction with oil-resistant inner and outer jacket for indoor and outdoor service
• 16 AWG, 4-conductor configuration rated at 10 amps and 300 volts
• Meets NEC Article 400 and NEC Article 501.140 Class I Division 2 for use in applicable hazardous locations
• CSA certified and RoHS compliant; also meets MSHA requirements for mining applications
• Sold in 1-foot increments with a 125-foot minimum cut from a 250-foot coil
• Black jacket color for standard field identification

Compatibility

Designed as a flexible replacement cord for portable equipment, tools, and electrical devices requiring a 16 AWG 4-conductor SJEOOW-rated service cord in indoor or outdoor environments.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 400 and applicable local codes. De-energize all equipment and lock out power before replacing or terminating any service cord. Do not exceed the 10-amp or 300-volt ratings of this cord. Inspect the cord jacket for cuts or abrasions before placing into service; damaged cord must not be used.