Southwire 55039704 12/4 Seoow Outdoor Replacement Cord 600V

Product Description

The SOUTHWIRE 55039704 is a 12 AWG, 4-conductor SEOOW outdoor replacement cord rated at 600 volts. Constructed to the SEOOW designation, this cord is engineered for flexible service in demanding outdoor environments where oil resistance and all-weather durability are required. The 12/4 configuration delivers four current-carrying conductors at a gauge suited for motor-driven equipment, power tools, and portable industrial loads. Licensed electricians and equipment service technicians are the primary installers. The cord is sold in 1-foot increments from a 250-foot coil, with a minimum cut length of 125 feet per order.

This cord is appropriate for outdoor portable power applications in residential, commercial, and light industrial settings. Common use cases include replacement cording on power equipment, portable generators, compressors, and other motor loads requiring a flexible, multi-conductor supply cord. The SEOOW jacket construction provides resistance to oil, moisture, and abrasion, making it suitable for job-site environments. It meets NEC Article 400 and NEC Article 501.140 Class I Division 2 requirements, making it appropriate for select classified locations as permitted by code.

Key Features

• 12 AWG, 4-conductor construction suitable for higher-current portable equipment loads
• 600-volt rating for use across a wide range of portable power applications
• SEOOW jacket provides oil resistance, moisture resistance, and outdoor durability
• Sold in 1-foot increments with a 125-foot minimum cut length from a 250-foot coil
• Meets NEC Article 400, NEC Article 501.140 Class I Div. 2, UL 62, CSA C22.2 No. 49, CSA FT2 Flame Test, MSHA, and RoHS requirements
• Black jacket color for standard outdoor service identification

Compatibility

Designed as an OEM-style replacement cord for outdoor portable power equipment requiring 12/4 SEOOW flexible cord rated at 600 volts.

Installation Notes

Installation and termination of this replacement cord should be performed by a licensed electrician in accordance with NEC Article 400 and any applicable local codes. De-energize all equipment fully and verify zero voltage with a meter before removing or attaching any cord assembly. Use properly rated connectors, strain reliefs, and cord grips appropriate for the ampacity and environment. Do not exceed the cord's rated voltage or bend radius in a way that damages the jacket or conductors.