Southwire 55039401 Seoow Cord 10/4 600V Black Outdoor

Product Description

The SOUTHWIRE 55039401 is a 10 AWG, 4-conductor SEOOW outdoor replacement cord rated at 600 volts. SEOOW construction uses an oil-resistant, ozone-resistant outer jacket with an oil-resistant insulation layer, making it suitable for demanding industrial and outdoor service environments. The cord carries a black jacket and is sold in 1-foot increments from a 250-foot coil. Minimum cut length is 125 feet. Electricians and industrial maintenance technicians use this cord for portable equipment hookups, motor leads, and power supply applications where flexibility and environmental resistance are required.

This cord is intended for outdoor and industrial applications where exposure to oil, moisture, and mechanical wear is common. SEOOW-type cord is commonly used for portable tools, portable lighting, compressors, generators, and similar equipment in commercial and industrial settings. The 10 AWG wire gauge and 4-conductor configuration make it appropriate for higher-current portable equipment circuits. It meets multiple regulatory standards and is suitable for use in Class I Division 2 hazardous locations as recognized under NEC Article 501.140.

Key Features

• 10 AWG, 4-conductor SEOOW construction for flexible, heavy-duty portable service
• 600-volt rating suitable for commercial and industrial power circuits
• Oil-resistant and ozone-resistant jacket rated for outdoor environments
• Compliant with NEC Article 400, NEC Article 501.140 Class I Div. 2, and UL 62
• CSA certified including CSA C22.2 No. 49 and CSA FT2 Flame Test
• RoHS compliant; meets EPA 40 CFR and TCLP Method requirements
• Sold in 1-foot increments; minimum cut length 125 feet from a 250-foot coil

Compatibility

Designed as an OEM-style and field-replacement cord for portable electrical equipment, power tools, compressors, and similar devices requiring a 10 AWG 4-conductor 600-volt flexible cord in outdoor or industrial service conditions.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 400 and all applicable local codes. De-energize and lock out the circuit before terminating or replacing any cord assembly. SEOOW cord is flexible but should not be used as a fixed wiring method or run through conduit as a substitute for building wire. Inspect the jacket for cuts or abrasion before placing the cord in service.