Southwire 55039301 10/3 Seoow Outdoor Replacement Cord 600V

Product Description

The SOUTHWIRE 55039301 is a 10 AWG, 3-conductor SEOOW outdoor replacement cord rated at 600 volts. Built for demanding job-site and field-service applications, this cord carries a flexible, oil-resistant jacket suited for environments where standard indoor cord would fail. The SEOOW designation indicates a thermoset rubber outer jacket rated for both oil and water exposure, making it a go-to choice when replacing damaged or undersized portable power cords on heavy equipment, portable tools, and temporary power setups. Electricians and maintenance technicians stock this cord for service calls where a cut-to-length solution is required on site.

This cord is sold in 1-foot increments with a minimum cut length of 125 feet, taken from a 250-foot coil. It is well suited for residential, commercial, and light industrial applications requiring a robust portable cord rated for outdoor use. Typical installations include replacement cords on portable generators, compressors, industrial fans, and similar motor-driven equipment. The 10 AWG conductors handle the current demands of larger portable loads where lighter-gauge cords are not appropriate.

Key Features

• SEOOW construction with oil- and water-resistant thermoset rubber jacket rated for outdoor use
• 10 AWG, 3-conductor configuration handles higher-ampacity portable equipment loads
• 600-volt rating meets requirements for a wide range of portable power applications
• Sold in 1-foot increments from a 250-foot coil, minimum cut length 125 feet
• Meets NEC Article 400 and NEC Article 501.140 Class I Div. 2 listing requirements
• RoHS compliant and listed to UL 62, CSA C22.2 No. 49, and CSA FT2 Flame Test standards

Compatibility

Designed as an OEM-style replacement cord for portable equipment, tools, and machinery requiring a 10 AWG, 3-conductor, 600-volt outdoor-rated flexible cord in an SEOOW jacket.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 400 and any applicable local codes. De-energize all circuits and confirm zero voltage at both ends before cutting, terminating, or connecting this cord. Use appropriate strain relief connectors and cord grips at termination points to prevent jacket damage and conductor pull-out. Do not exceed the ampacity rating for 10 AWG conductors as published in NEC Table 400.5(A) for the applicable conditions of use.