Southwire 41197 Power Outlet Strip 15A 120V 6 Outlets

Product Description

The SOUTHWIRE 41197 is a 6-outlet power strip rated for 15 amps at 120 volts, built for general indoor use in residential and light commercial settings. The strip measures 5.5 inches in length and 2 inches in width, constructed from white plastic with a manual trip-reset breaker for overload protection. NEMA 5-15R receptacles accept standard two-pole, three-wire plugs. Electricians and facilities maintenance technicians use this strip to add outlet capacity at workbenches, equipment racks, or service panels where temporary or permanent outlet distribution is needed without a dedicated circuit extension.

The 41197 is intended for dry, indoor environments. Its compact 5.5-inch strip body fits standard mounting locations. The free-hanging and keyhole mount options allow it to lie flat on a surface or fasten to a wall or panel using a screw or fastener through the keyhole slot. No cord is included with this unit, making it suitable for hardwired or direct-connect applications where a pigtail or conduit feed is already in place at the installation point.

Key Features

• 6 NEMA 5-15R outlets rated at 15 amps, 120 volts
• Manual trip-reset circuit breaker for overload protection
• Keyhole and free-hanging mount options for flexible installation
• Compact 5.5-inch strip length fits tight spaces
• White plastic housing rated for indoor use
• No power cord — supports direct hardwired or conduit-fed connections

Compatibility

Designed as a general-purpose indoor power strip compatible with standard NEMA 5-15R plug configurations in residential and light commercial electrical systems.

Installation Notes

Installation should be performed by a qualified electrician in accordance with applicable NEC requirements. De-energize the circuit at the breaker before making any wiring connections. This strip is rated for indoor dry locations only — do not install in wet, damp, or outdoor environments. Verify the supply circuit amperage does not exceed the 15-amp rating of the strip before connecting loads.