Southwire 411030513 Machine Tool Wire 14 Awg 500 Ft Purple

Product Description

The SOUTHWIRE 411030513 is a 14 AWG stranded machine tool wire rated for use in industrial control panels, automation equipment, and machine tool wiring applications. The conductor is built with 41 strands for flexibility and is insulated with polyvinylchloride (PVC) at an outside diameter of 0.136 inches. The wire carries a maximum operating temperature of 221 degrees F and a minimum operating temperature of -22 degrees F, making it suitable for demanding industrial environments. Licensed electricians and industrial maintenance technicians handle installation of this wire type.

This wire is used in the internal wiring of machine tools, control cabinets, and automated manufacturing equipment. The 500-foot spool length suits panel shops and contractors running multiple circuits or larger installations. The purple color coding aids in circuit identification during installation and troubleshooting. Its resistance to acids, moisture, and oil makes it a practical choice in shop-floor environments where fluid exposure and harsh conditions are common.

Key Features

• 14 AWG, 41-strand conductor for flexibility in tight routing
• PVC insulation rated from -22 degrees F to 221 degrees F
• Acid-resistant, moisture-resistant, and oil-resistant insulation
• Outside diameter of 0.136 inches for conduit fill calculations
• Purple color for circuit identification in multi-wire installations
• 500-foot spool length for panel shops and larger wiring runs

Compatibility

Designed for use in machine tool and control panel wiring applications in accordance with NFPA 79 (Electrical Standard for Industrial Machinery) and NFPA 70 (National Electrical Code). Suitable for installation in conduit or raceways where a UL-listed, oil-resistant, flexible stranded conductor is required.

Installation Notes

Installation should be performed by a licensed electrician following applicable NEC (NFPA 70) and NFPA 79 requirements. De-energize and lock out all circuits before pulling or terminating wire. Use appropriately sized terminals and connectors rated for 14 AWG stranded conductors. Verify conduit fill calculations using the 0.136-inch outside diameter before pulling wire through conduit.