Southwire 3533SW3323 Indoor Extension Cord 14/3 Awg 9 Feet

Product Description

The SOUTHWIRE 3533SW3323 is a 9-foot indoor extension cord rated for 15 amps at 125 volts. Built with 14/3 AWG SPT-3 construction and three conductors, it delivers a robust connection for tools and equipment in residential and light commercial settings. The NEMA 5-15R receptacle accepts standard three-prong plugs. The beige jacket blends into typical indoor environments. Electricians and maintenance technicians reach for this cord when a reliable, code-appropriate temporary or semi-permanent power extension is needed without pulling new wire. UL Listed and OSHA-compliant standards back the build quality.

This cord is suited for indoor applications where a single outlet extension is needed at a workbench, service panel area, HVAC equipment room, or mechanical space. The 9-foot length gives enough reach from a nearby outlet to power a tool, diagnostic instrument, or low-draw appliance. With 14 AWG conductors, it handles loads up to 15 amps without significant voltage drop at this length, making it appropriate for most portable power tools and test equipment used by trade professionals.

Key Features

• 15-amp, 125-volt rating handles standard single-phase tool and equipment loads
• 14/3 AWG SPT-3 construction with three conductors including ground
• NEMA 5-15R single receptacle accepts standard three-prong plugs
• 9-foot length provides practical reach in tight mechanical and service spaces
• UL Listed and OSHA-compliant for use in professional trade environments
• Beige jacket rated for indoor use only

Compatibility

Designed for indoor use with standard NEMA 5-15P three-prong plugged equipment rated at 15 amps or less at 125 volts.

Installation Notes

This extension cord is intended for indoor use only and should not be routed through walls, ceilings, or floors as a substitute for permanent wiring. Per NEC guidelines, extension cords are for temporary power only. Inspect the cord for damage before each use and do not exceed the 15-amp rated load. Electricians and service technicians should ensure the source circuit is protected by a 15-amp or 20-amp breaker appropriate to the receptacle configuration.