Southwire 26188802 Generator Cord 20A 125V 10 Awg 3-conductor

Product Description

The SOUTHWIRE 26188802 is a 3-conductor generator cord rated for 20 amps at 125 volts AC, built on 10 AWG wire. It provides a reliable power connection between a portable generator and compatible NEMA receptacles, handling the load demands typical of job site and residential standby applications. The 10 AWG conductor size supports 20-amp circuits without excessive voltage drop over the cord run. At 11 pounds, this is a substantial, heavy-duty cord built for repeated field use. Electricians and generator service technicians rely on cords like this to safely bridge generator output to transfer switches, inlets, or load connections during outage response or planned maintenance work.

This cord is designed for use with NEMA receptacles found on portable and standby generators. It suits residential and light commercial applications where a 125-volt, 20-amp circuit is required. Typical install scenarios include temporary power hookups on construction sites, emergency power during utility outages, and service work where a generator powers tools or equipment through a dedicated outlet or inlet connection. The 3-conductor configuration includes the hot, neutral, and ground conductors required for a grounded 125-volt circuit.

Key Features

• 20-amp, 125-volt AC rating suitable for standard single-phase generator output circuits
• 10 AWG conductors support 20-amp load capacity with reduced voltage drop
• 3-conductor design includes hot, neutral, and ground for a properly grounded circuit
• Compatible with NEMA receptacles commonly found on portable and standby generators
• Weighs 11 pounds, indicating heavy-gauge construction for durability in field use

Compatibility

Designed for use with NEMA receptacles on portable and standby generators requiring a 20-amp, 125-volt, 3-conductor connection.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 445 governing generators and Article 400 covering flexible cords. Always de-energize and shut down the generator completely before connecting or disconnecting the cord. Inspect the cord jacket and plug blades for damage before each use, and never exceed the cord's 20-amp current rating. Do not use extension cords in series with this cord to extend its reach, as this can cause voltage drop and overheating.