Southwire 2549SW0054 Outdoor Extension Cord 100 Ft 12/3 Awg

Product Description

The SOUTHWIRE 2549SW0054 is a 100-foot, 12/3 AWG SJTW outdoor extension cord rated for 15 amps at 125 volts AC. Built with three conductors and a NEMA 5-15P plug on one end and a single NEMA 5-15R receptacle on the other, this cord is designed for heavy-duty temporary power runs in outdoor environments. The 12-gauge conductors support tool and equipment loads that would overheat a lighter 14 or 16 AWG cord. Electricians, contractors, HVAC techs, and pool service professionals rely on cords like this for powering equipment at job sites where a permanent outlet is not within reach. The green and red jacket color aids visual identification on busy job sites.

This extension cord is suited for outdoor use on residential and light commercial job sites. Common applications include powering portable compressors, hand tools, lighting, and service equipment during installation or maintenance work. The SJTW jacket construction resists moisture, temperature swings, and abrasion, making it appropriate for ground-level runs in wet or rough conditions. The 100-foot length provides enough reach for most service vehicle to work-area scenarios without requiring a second cord in series.

Key Features

• 12/3 AWG SJTW construction — rated for outdoor and wet-location use
• 15 amp, 125 volt AC rating supports common tool and equipment loads
• 100-foot length reduces the need to daisy-chain multiple cords
• NEMA 5-15P plug and single NEMA 5-15R receptacle for standard 15-amp outlet compatibility
• UL Listed and CSA Certified; meets OSHA requirements for job-site use
• Green and red jacket color aids identification in multi-cord environments

Compatibility

Designed for use with any standard NEMA 5-15 outlet and equipment accepting a NEMA 5-15R receptacle, up to 15 amps at 125 volts AC.

Installation Notes

Extension cords should be fully uncoiled before use to prevent heat buildup in the conductor. Do not exceed the rated 15-amp load; overloading a cord jacket can cause insulation damage and create a fire hazard. Inspect the jacket, plug, and receptacle for damage before each use, and remove from service if the outer jacket is cut, abraded, or the ground pin is missing. Per OSHA and NEC guidelines, extension cords are intended for temporary use only and should not substitute for permanent wiring.