Southwire 22968283 Thhn 12 Awg Stranded Wire Green 50 Ft

Product Description

The SOUTHWIRE COLEMAN CABLE 22968283 is a 50-foot spool of 12 AWG stranded copper THHN building wire in green insulation. Rated at 600 volts and 90 degrees C, this wire is designed for use in conduit runs in commercial and residential electrical systems. The nylon jacket over the thermoplastic insulation resists moisture, oil, and heat, making it suitable for dry and damp locations inside raceways. Licensed electricians install this wire during rough-in and service work. The stranded construction provides flexibility for pulling through conduit compared to solid conductors.

This wire is commonly used in branch circuit wiring, panel feeders, and general-purpose electrical installations. The green insulation identifies it as an equipment grounding conductor per NEC conventions, making it the correct choice for ground runs in conduit systems. It arrives on a plastic spool for clean payout during installation. Sold in a package quantity of two spools, this format suits jobs requiring multiple runs of grounding wire across a service or commercial retrofit.

Key Features

• 12 AWG stranded copper conductor for flexible conduit pulls
• THHN insulation with nylon jacket rated for 600 volts and 90 degrees C
• Green insulation for equipment grounding conductor identification per NEC
• 50-foot length on a plastic spool for controlled payout
• Suitable for use in dry and damp locations inside conduit or raceways

Compatibility

Designed for use as an equipment grounding conductor in conduit-based wiring systems where THHN-rated wire is specified for 600-volt applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and verify zero voltage with a meter before pulling or terminating wire. THHN wire must be installed inside a conduit or raceway and is not rated for direct burial or exposed outdoor use without additional protection. Confirm wire gauge and insulation type match the circuit requirements and breaker rating before installation.