Southwire 22960901 Thhn Thwn 14 Awg Building Wire 500 Ft

Product Description

The SOUTHWIRE 22960901 is a 14 AWG stranded copper building wire rated for THHN and THWN applications at 600 volts and 15 amps. The conductor consists of 19 strands of copper encased in thermoplastic insulation with a nylon jacket, giving it flexibility for pulling through conduit in both dry and wet locations. The yellow jacket color aids in circuit identification during rough-in and panel work. This 500-foot spool suits residential and light commercial wiring projects where a full coil is needed for branch circuit runs. Licensed electricians install this wire in accordance with NEC requirements for general-purpose branch circuit wiring.

This wire is suited for installation in conduit on branch circuits in residential, commercial, and industrial settings. The THHN rating covers dry locations while the THWN dual rating extends use to wet locations, making it a versatile choice across a wide range of wiring scenarios. The 14 AWG size is standard for 15-amp branch circuits feeding lighting, outlets, and small appliance loads. The 500-foot length covers extended runs without mid-spool splicing in most typical installations.

Key Features

• Dual THHN/THWN rating for use in both dry and wet conduit installations
• 19-strand stranded copper core for flexibility and pull-through ease
• Nylon outer jacket resists abrasion, gasoline, oil, and moisture
• Thermoplastic insulation rated to 194 degrees F maximum operating temperature
• Yellow jacket color for easy circuit identification in panel and conduit work
• Meets UL 83, UL 1063 (MTW), CSA, RoHS, and Federal Specification A-A-59544

Compatibility

Designed for use in conduit-based branch circuit wiring systems requiring 14 AWG THHN/THWN-rated stranded copper conductors at 600 volts and 15 amps in residential, commercial, and industrial applications.

Installation Notes

Installation should be performed by a licensed electrician in compliance with NEC article requirements for conductor sizing, conduit fill, and circuit protection. De-energize the circuit and verify absence of voltage before making any connections. This wire must be pulled through approved conduit and is not rated for direct burial or free-air installation without conduit. Avoid exceeding the 194 degrees F temperature rating during installation in high-heat environments.